Login to enter your own
review of this item.
Center total is the Seller's overall score, averaged from each active component:
Atomic Mall Feedback: Imported Feedback: Order Fulfillment Rate: |
0.0 0.0 100 | |
Trophies Earned |
Commercial Noodle Making Electric Machine
DMZ-200b Electric Noodle Making Machine Producing Capability: 25-30 Kg/h Noodle Maker 3-9mm Press Flour Machine
Product : This series of machine is suitable for hotels, restaurants and noodle shop, family pasta making, which have advanced structure, well appearance, high quality, fine workmanship, surface health, safety and reliable. This series of machine has powerful motive force, with low power consumption, low to good stability. Insert power and press switch to control machine 's working, light use and convenient.
Electric Voltage: 220 v
Rated frequency: 50 hz
Rated input power: 180 w
The input power: 550W
Motor power: 180 watts
Waterproof level: 1 PXL
Producing capability: 25 to 30 kg/h
Equipped Two kinds of function surface knife
. Production noodles size 3 mm and 9 mm. Noodles shape is flat surface
How to use Three groups of red screw
How to use Three groups of red screw
The first group, adjust The thickness of The roller, adjust The size: 1 mm - 5 mm.
The second group, fixed screw, The fixed clamp screws and tighten The screws, fixed surface knife
The third group, DiaoZhengMian knife thickness, The production of different size noodles. Use two kinds of function surface knife, The Use of The screw.
Method of use:
1. With noodles: flour + warm water (about 5:2), can be in the water into a small amount of salt and alkali; If do egg noodle don't add or less water in the basin in the mixed together.
2. Prepare production: will adjust the dough and cut into flake (about 20 mm or so), and some dry flour for later use.
Check the work surface, clear surface dirt, in surface knife shaft sleeve and gear place put some more oil.
3. Rolling surface: first remove the plane knife, regulate the pressure surface roll two head regulator, the two sides roll gap adjustment for 2.5 3 mm, will plug ty 220 v power supply socket, press the switch on the machine, and the good facets in surface bucket, introducing pressure surface between rollers, repeatedly roll system 4-5 times, final adjustment surface roll gap of 1.5 mm, complex pressure once.
5. Section: put on plane knife, according to need to adjust plane his sword and regulator, clockwise will regulator turn in place cut fine flour, counterclockwise turn in place cut coarse surface, finally will pressure good MianPi put surface bucket introduced between two roll until section knife, can cut into thick or thin noodles.
6. End: after using, turn off the machine power switch, pulled the plug, will the body, knife, roller clean up.
Note: can't washed
Subject to Availability
Thank you
**
Delivery Information:
Important DELIVERY Information, Please read before you order-
*All Products come from CHINA & are subject to Availability.
( Estimated ) delivery time to every country
*